Professional breakers
The construction of new buildings and the major renovation of old ones cannot be done without digging and drilling holes. An activity that is not at all pleasant for either the contractors or the affected neighbors, because it is associated with a lot of noise and vibrations.
You just have to put up with it, but it's nice if it's shorter. And shortening the repair time can be done thanks to the right tools. If you're looking for other solutions in the power tools category, you'll find a variety of machines for various construction and repair activities.
Breakers are machines used primarily to break down solid building structures into pieces. They can successfully break down concrete slabs as well as brick walls.
How does the hammer work?
The main working tool for chisels is the awl or chisel (chisel), which is placed in a chuck.
In addition to demolition, with the help of a chisel, chiselers also successfully cope with removing parts of the surface of solid objects. A typical example is chipping tiles from walls and floors.
A characteristic feature of hammer drills is that their chuck does not have a rotating movement, but only a striking movement.
The impact force of these can be greater than that of hammer drills. This requires, accordingly, a more powerful electric motor and a stronger impact mechanism.
For this reason, the weight of some machines reaches 30 kg.
In most models, the frequency of impacts is smoothly adjusted, but there are also those with a switch for selecting one of several fixed values, as well as with a single frequency.
What does the effective operation of breakers depend on?
The effective operation of breakers depends primarily on the correct choice of tool and its condition.
Usually, the operating instructions for the chisels give the recommended shapes of the awls and chisels, as well as the angles at which they should be periodically sharpened.
No less important is their periodic hardening, the procedure for which is also clarified in the instructions.
A useful feature of most models is the ability to place the chisel in the chuck at a different angle (usually 12 or 16 positions), which allows for both comfortable holding of the chisel and removal of the material being processed in a desired plane.
What do we offer you?
We offer you models of the RAIDER brand and the more modern RAIDER PRO generation.
The grinders come in different capacities and speeds that suit the different specifics of the work you have to do.
The differences in their technical parameters are, of course, reflected in the prices of the products.
You can find out more about the features and extras in the personal descriptions of the models.
The prices are perfect, as they are in a favorable ratio for the customer with the high quality guaranteed by RAIDER PRO.
