Sealing tape for slats 0.03m x 0.06m x 1m BRAMAC

Bramac Roofing Tape (1 m x 0.03 m x 0.06 m) is a specialized self-adhesive sealing element from the manufacturer's roofing system, designed for precise waterproofing protection of the intersection lines between two roof slopes (roofing battens). The product serves as an elastic barrier in the areas where the tiles overlap with the metal roofing batten profile, ensuring complete sealing of the under-roof space in these critical areas for the roof.

The main function of the impregnated foam tape is to prevent the penetration of drifting snow, fine raindrops, dry leaves, dust and insects under the roof covering. Thanks to its open-pore structure and special impregnation, the material remains elastic, closely follows the relief and the lower surface of the tiles and does not rot. At the same time, the tape allows any moisture to drain freely along the ridge to the gutters, without retaining water that could damage the supporting wooden structure.

Purpose

• Sealing the lateral spaces between the cut pitched roof tiles and the base of the aluminum or sheet metal roof panel
• Protection of the under-roof space from drifting snow and dust in severe weather conditions and storms
• Preventing birds, large rodents and insects from entering the roof structure through the eaves
• Application in the construction of new multi-pitched roofs and repairs of complex roof geometries

Main advantages

• Quick, clean and easy installation without tools thanks to the factory-applied strong adhesive tape
• High elasticity and ability to perfectly fill the cavities under the waves of the roof tiles
• Impregnated material with increased resistance to aging, rot, moisture and temperature fluctuations
• Preserves the roof's drainage function - stops snow and wind, but allows condensation to drain freely
• A versatile grey colour that remains completely hidden and discreet under the edge of the tiles

Technical characteristics

• Type: self-adhesive impregnated sealing tape for ulams
• Material base: specially treated polyurethane foam (polyurethane foam) with adhesive layer
• Length of one piece: 1000 mm (1.0 meter)
• Profile height: 30 mm (0.03 meters)
• Base width: 60 mm (0.06 meters)
• Consumption rate: 2 pieces per linear meter of ulama (1 piece for the left and right slopes along the length of the profile)
• Method of attachment: self-adhesive surface (mounted on a cleaned and dry surface)
• Classification: original Bramac roofing system accessory
• Color: gray