Elastic waterproofing 1.2 kg Aquastop 4

Elastic waterproofing Aquastop 4 is a high-quality product, also known as liquid rubber, designed for reliable protection of various surfaces from moisture penetration. It is suitable for both indoor and outdoor use and is used on concrete roofs, terraces, floors, walls, window sills and canopies. It is distinguished by its exceptional resistance to weather influences, while at the same time creating a hydrophobic, highly elastic film that provides long-lasting protection of structures.

The main advantage of Aquastop 4 is the wide temperature range of operation - from -30°C to +80°C, which makes it particularly reliable in climatic fluctuations. Thanks to this resistance, the waterproofing can be used both in summer heat and in winter frosts, without losing its properties. Additionally, the product is developed according to the BDS EN 14891 standard, which guarantees its quality and compliance with European requirements.

The consumption rate of the waterproofing varies depending on the type of surface - for horizontal areas it is approximately 1.5-2.0 kg/sq.m, while for vertical ones - 0.75-1.0 kg/sq.m when applying one layer. This allows for optimal calculation of the required quantity for the specific object. The product is easy to apply with a brush or roller, and it is recommended to work at a temperature between +5°C and +35°C.

To achieve the best result, it is important that the base is thoroughly cleaned and dusted, without the presence of greasy stains or contaminants. If necessary, Aquastop 4 can be diluted with water in a ratio of 2:1. Drying time under standard conditions of 20°C and 65% relative humidity is about 24 hours. After drying, the material forms a dense, waterproof layer that prevents moisture penetration even in heavily loaded areas.

Aquastop 4 is available in convenient packaging for storage in a dry and cool room at a temperature of +5°C to +35°C. The product does not contain organic solvents and is environmentally friendly, which makes it safe for use in indoor areas. In combination with accompanying products such as a deep-penetrating primer, the waterproofing provides even better adhesion and protection.

Main characteristics:

• Type: Elastic waterproofing (liquid rubber)
• Application: Interior and exterior - roofs, terraces, floors, walls, sills, canopies, etc.
• Temperature resistance: from -30°C to +80°C
• Operating temperature: from +5°C to +35°C
• Consumption rate: 1.5-2.0 kg/sq.m (horizontal surfaces), 0.75-1.0 kg/sq.m (vertical surfaces)
• Drying time: 24 hours at 20°C and 65% RH
• Dilution: with water, up to 2:1 if necessary
• Color: White
• Compliance with standard: BDS EN 14891
• Storage: from +5°C to +35°C