Deep penetrating primer Borogrund 1l

Deep penetrating primer Boro primer of BORO penetrates into the surface layer of the base and regulates its absorbency. Increases the strength of adhesion with the next coating. It does not contain solvents and is ready for use. It is applied on walls, ceilings and floors. For indoor and outdoor use. For priming absorbent substrates such as gypsum, lime, lime-cement plasters, dry floors, gypsum board and gypsum fiberboard, gypsum and cement floor screeds, etc. Before applying latex, facade paints, ground coats, mineral and polymer plasters, tile adhesives, wallpapering and cork cladding, etc. The consumption rate for undiluted primer is from 40 to 65 ml/sq.m, and for priming with diluted primer on aerated concrete is about 400 ml/sq.m.
Drying time is 4-6 hours at a temperature of 20°C. It is not recommended to apply the primer at a temperature below 5°C.