Polymer plaster white 25kg scratched 2mm Oxxi S KNAUF

Knauf OXXI S 2.0 is a high-quality paste acrylic facade plaster with a decorative scratched structure and a grain size of 2.0 mm, intended for the final coating of external walls in new construction or renovation. The product combines a decorative effect with excellent protective properties and is compatible with external thermal insulation systems (ETICS) with EPS and XPS boards.

Thanks to its high weather resistance, low water absorption and good vapor permeability, the plaster provides long-lasting and sustainable protection for the facade in all climatic conditions.

It is suitable for all mineral substrates and provides a uniform appearance with a modern finish. With Knauf OXXI S 2.0, the facade receives not only aesthetic value, but also lasting protection against pollution, UV rays, rain and microflora.

Advantages:

• Ready to use - no additional mixing required
• High resistance - to weathering and pollution
• Decorative effect - scratched structure with grain size 2.0 mm
• Compatibility - with EPS and XPS thermal insulation systems
• Vapor permeability - allows walls to "breathe"

Application:

• Exterior facades - of new and old buildings
• Thermal insulation systems - with EPS or XPS boards
• Mineral bases - such as concrete, lime-cement plasters, etc.
• Decorative coating - with structural finish

Preparation of the base:

• The surface must be clean, dry and free of dust or grease.
• Priming with a suitable primer, e.g. Knauf Quarzgrund
• Application temperature: from +5°C to +25°C
• Protecting freshly applied plaster from direct sun, rain and strong wind

How it works:

• Application: with a stainless steel trowel
• Structuring: immediately after application with a plastic trowel
• Consumption rate: approximately 3.0 kg/m2
• Drying time: about 1 day for each mm of layer thickness
• Complete drying: after about 14 days under favorable conditions

Feature:

• Product type: Pasty acrylic facade plaster
• Structure: Scratched
• Grain size: 2.0 mm
• Color: White (tinting possible)
• Packaging: 25 kg bucket
• Density: about 1800 kg/cubic meter
• Vapor permeability: V1 (high)
• Water absorption: W3 (low)