Description
Webertec D-protect liquid waterproofing is a ready-to-use product based on synthetic dispersion, intended for indoor and outdoor use. Thanks to its formula, it provides seamless and jointless protection against moisture and is suitable for wet rooms such as bathrooms, kitchens, laundry rooms, as well as for balconies with an area of up to 6-7 sq.m. The waterproofing forms an elastic and reliable membrane that prevents water penetration and at the same time creates a smooth base for laying tiles. The product is highly elastic and has the ability to stretch up to about 310%, which allows it to bridge cracks and protect the surface from cracking during temperature fluctuations or structural movements. This makes webertec D-protect an excellent choice for critical areas subject to moisture and dynamic loads.
The liquid rubber is compatible with the elastic tile adhesives webercol flex, webercol flex pro and webercol extra flex, with which a complete system for waterproofing and tiling wet rooms, terraces and balconies can be built. This ensures safety, durability and resistance of the flooring. The product is easy to apply - it is applied to a well-cleaned and dry surface with a brush, roller or trowel. It is not suitable for pools and areas that are constantly under water, as it is not designed to work under constant water pressure. For maximum efficiency on balconies, it is recommended to lay on a base with a minimum slope of 2% to ensure proper water drainage.
Main characteristics:
- For indoor and outdoor use - wet rooms and balconies
- For waterproofing under tiles, in thin-layer or thick-layer method
- Highly elastic - elongation around 310%
- Bridges cracks and provides seamless protection
- Suitable for areas up to 6-7 sq.m
- Consumption rate: about 1.25 kg/m² for a dry layer of 0.5 mm
- Not suitable for swimming pools and places permanently under water
Information and Manuals
Specifications
- Brand
- Weber
Products with Similar Features
Questions & Answers
-
Reply
Открита тераса 26 м2. Може ли да се използва ВЕБЕР - за хидроизолация
йорданsee 1 answers-
Администратор
Здравейте! Техническата документация към продукта гласи, че хидроизолацията е подходяща за мокри помещения и балкони с размер до 6-7 кв.м.
Успех!
-
-
Reply
Преди нанасянето на хидроизолацията върху зелен гипсокартон в баня ,поставя ли се грунд ?
Павлина Владимироваsee 1 answers-
Администратор
Здравейте! Нанасянето на хидроизолацията може да стане директно, без да се поставя грунд преди това.
Успех!
-
-
Reply
С какв валск се нанася Хидроизолацията Вебер
Тедиsee 0 answers -
Reply
След колко време се нанася вторият слой Хидроизолацията Вебер
Иванsee 1 answers-
Администратор
Здравейте! Според инструкциите напроизводителя, вторият слой се нанася след пълно изсъхване на първия, което във времето се равнява на около 3 часа. Нанасянето става с обикновена четка или валяк за боядисване. Изпращаме Ви линк към универсален валяк, който може да Ви свърши работа:
https://www.masterhaus.bg/bg/product/1136-universalen-valjak-za-bojadisvane-180mm
Успех!
-
-
Reply
Хидроизолацията Вебер с какво се нанася-четка, пистолет?
Николоваsee 1 answers-
Веселин Люцканов - администратор
Здравейте! Хидроизолацията се нанася с четка и валяк - кръстосано, докато се постигне дебелина на слоя поне 1 мм. Задължително е основата на нанасяне да бъде суха и отлично почистена от прах и други замърсявания.
Успех!
-
-
Reply
Да се нанася върху вътрешна бетонова стена на мазе,след което да се направи хоросанова мазилка ?
Георги Петровsee 1 answers-
Веселин Люцканов - администратор
Здравейте! Хидроизолацията на WEBER е подходяща за подобна употреба, каквато е заложена във въпроса Ви. Задължително обаче изчакайте пълното изсъхване на хидроизолацията, преди да нанесете хоросановата мазилка. По спецификация пълно изсъхване на хидроизолацията настъпва след 24 часа, но изчакайте поне 36 часа, за да сте напълно сигурен, че ще постигнете желания ефект.
Успех!
-




Rate the Product