Lid divider red small BRAMAC

Bramac Cover baffle (small, red) is a specialized finishing accessory from the manufacturer's roofing system, made of high-quality and UV-resistant PVC. The element is designed for precise shaping and closing of the side front openings at the first and last ridge cover of the horizontal ridge in gable roof structures. The product provides a clean and aesthetically pleasing roof finish using the dry installation method, eliminating the need for additional baffles if a specialized starting cover is used.

The main function of the small barrier is to seal the front cavities of the ridge, while at the same time supporting the proper operation of the roof. The profile is equipped with precisely shaped ventilation holes that allow warm and humid air to escape freely from the under-roof space. At the same time, the fine lattice structure acts as a mechanical barrier, stopping birds, bats, large insects and small animals from entering under the roof covering. Mechanical reinforcement is done quickly and easily by fixing with an assembly nail or screw directly to the ridge timber structure.

Purpose

• Closing the side front openings of the first and last cover on gable roofs
• Aesthetic and structural design of the beginning and end of the horizontal ridge
• Providing an exit point for ventilation of the air flow under the ridge caps
• Protection of the under-roof space in the end zones against nesting birds and pests

Main advantages

• Fast, clean and easy dry installation with nails without the use of cement mortars
• Long-lasting protection against burning and aging thanks to UV-stabilized PVC material
• Optimal support for under-roof ventilation without the risk of pest penetration
• Professional and fully finished visual appearance of the ridge in tone with the roof covering
• Precise factory dimensions for a perfect fit to the contour of standard concrete covers

Technical characteristics

• Type: end ventilation baffle for the front of a roof hatch
• Material base: high-quality UV-resistant polyvinyl chloride (PVC plastic)
• Profile height: 192 mm (19.20 cm)
• Width/Thickness of the element: 22.20 mm
• Fixing method: mechanically by hammering with a nail or screwing with a screw to the supporting batten
• Applicability: for gable roofs when installing standard Bramac ridge caps
• Consumption rate: 1.0 piece for each open end of the main horizontal ridge
• Classification: original finishing accessory for dry installation from the Bramac system
• Color: red