Bitumen waterproofing 2l weber.tec 915 component B WEBER

Weber.tec 915 Component B is a special powder accelerator designed for mixing with the bitumen waterproofing weber.tec 915 Component A. After adding to the base paste, the system becomes a two-component waterproofing with accelerated drying and significantly higher resistance to adverse weather conditions.

Thanks to the reactive cements and special fillers contained in the product, it starts a rapid deep hardening process. This allows for reliable waterproofing work on horizontal surfaces, low-absorbency substrates and at higher air humidity.

Purpose

• For mixing with weber.tec 915 Component A
• To accelerate the drying of bitumen waterproofing
• For operation in high humidity conditions
• For application at lower temperatures above +5°C
• For horizontal surfaces
• For poorly absorbent substrates
• For external waterproofing systems

Main advantages

• Accelerates the hardening process
• Provides quick rain resistance
• Improves performance in adverse weather conditions
• Suitable for damp substrates and high humidity
• Easy mixing with Component A
• Without organic solvents
• 100% dry residue
• High reaction efficiency

Technical characteristics

• Type: Accelerator for bitumen waterproofing
• Brand: WEBER
• Series: weber.tec 915
• Component: B
• Consistency: Dry powder
• Color: Gray
• Packaging: 2 l
• Approximate weight: about 2 kg
• Dry residue: 100%
• Mixing ratio: 1 pack Component B to 30 l Component A
• Working time after mixing: 1 - 2 hours
• Application temperature: from +5°C to +35°C
• VOC content: 0%
• Shelf life: 12 months
• Application: As an additive to bitumen waterproofing weber.tec 915

Method of use

1. Gently stir weber.tec 915 Component A with an electric stirrer at low speed.
2. Gradually add the entire contents of Component B to the bucket of Component A.
3. Stir mechanically until a completely homogeneous mixture without lumps is obtained.
4. Pay attention to the walls and bottom of the container when mixing.
5. After preparation, apply the product according to the instructions for the weber.tec 915 system.
6. Use the finished mixture within a maximum of 2 hours.
7. Do not add water or other additives to the mixture.