Plaster with microcement effect Balitura Microcemento Basa

BALITURA MICROCEMENTO is a spectacular decorative multilayer coating with a microcement look, designed to create a modern, minimalist and industrial style in interior spaces. Thanks to its special water-based formula, combining micronized cements and copolymers, the product provides an elegant look, high mechanical resistance and a completely jointless coating.

The system is available as a two-component kit and is characterized by 100% waterproofness, excellent coverage and durability. It is suitable for application on perfectly flat cement and gypsum substrates and allows customization of the final result by adding a colorant according to the catalog. BALITURA MICROCEMENTO is a harmless product that does not contain solvents, volatile organic compounds or hazardous chemicals.

Purpose

• Interior walls, floors and ceilings
• Living spaces - living rooms, kitchens, bathrooms
• Commercial and public spaces
• Premises requiring a waterproof and wear-resistant coating
• Creating a modern, industrial and minimalist interior effect

Main advantages

• Exceptional strength and high wear resistance
• 100% waterproof coating
• Elegant industrial effect without joints
• Excellent coverage and even finish
• Solvent and VOC free
• Safe for health and the environment
• Possibility of coloring in 8 colors according to the catalog

Technical characteristics:

• Product type: decorative microcement coating
• System: two-component, water-based
• Composition: micronized cements and copolymers
• Kit: 10 kg dry material (base); 2.8 kg resin
• Application: 2 layers
• Tool: metal trowel
• Consumption: about 8 m²/set (depending on the substrate)
• Colors: 8 colors according to the catalog (colorant is purchased separately)
• Finish: sealer + 2 coats of polyurethane varnish (purchased separately)
• Recommended operating temperature: from +5°C to +25°C

Method of laying

• Preparing the base

1. The surface must be perfectly smooth, dry, clean, degreased and dust-free.
2. For absorbent surfaces such as cement screeds, putties, etc. it is necessary to prime with deep penetrating primer PRIME DB-55 Terazid

• Mixing the components

1. The dry material is mixed with the liquid component (resin) according to the manufacturer's instructions.
2. The selected colorant is added to the mixture and stirred until completely homogenized.

• Application

1. The material is applied with a metal trowel in two layers, with an interval between them of about 12 hours.
2. Work with cross movements to achieve an even decorative effect.

• Sanding, finishing and protection

1. After each layer has completely dried, the surface is sanded to obtain a smooth and even finish.
2. The coating is sealed with one layer of special sealing coating and two layers of polyurethane varnish for maximum protection and water resistance (purchased separately)