Silicone primer for plasters 25kg G 8300 Deko Professional Elements 0159 DEKO Plasters

DEKO Professional G8300 in color 0159 is a specialized silicone primer designed for preparing surfaces before applying dark decorative plasters. This product is key to achieving a professional finish, as its rich dark gray shade unifies the color of the base and ensures that even with larger plaster structures, it will look dense and homogeneous. Its silicone formula provides high weather resistance and allows the wall to "breathe", while strengthening the surface.
The use of this tinted primer is especially important for modern dark facades and interior accents, as it acts as a protective barrier against moisture and improves the adhesion of the finish coating. With G8300, applying the plaster becomes much easier and faster, and the risk of light spots when scratching the structure is completely eliminated. The product is ideal for working on concrete, plasterboard and reinforced layers in thermal insulation systems, ensuring durability and color stability.

Purpose:

• Priming before applying dark gray silicone, silicate or polymer plasters
• Preparation of facade thermal insulation systems (ETICS) for dark color solutions
• Creating a bonding bridge on concrete, mineral plasters and gypsum plasters
• Unifying the base color in the interior and exterior when working with color 0159

Main advantages:

• Ideal for dark plasters: The rich dark grey colour of the primer ensures a dense finish
• Silicone protection: High hydrophobicity and excellent vapor permeability of the film
• Increased adhesion: Creates a rough surface for a stronger grip of the plaster
• Durability: Protects the base from weathering and evens out its absorption capacity
• Easy to work with: Thixotropic structure prevents slipping when applied to vertical walls

Technical characteristics:

• Color: 0159 (Dark Gray)
• Density: 1.65 ± 0.05 kg/l
• Consumption rate: About 0.300 kg/m² (depending on the porosity of the wall)
• Drying time: 24 hours for full cure
• Non-volatile matter content: Minimum 66%
• Packaging: 25 kg

Method of use:

1. Substrate preparation: Ensure that the surface is sound, dry and clean. Old crumbling coatings must be removed and patched beforehand.
2. Homogenization: Mix the primer well at low speed with an electric mixer until a homogeneous mixture is obtained.
3. Dilution: If necessary, you can add a maximum of 0.5 l of water per 25 kg of product to adjust the density.
4. Application: Apply one even layer using a brush or roller. Work at air temperatures between +5°C and +30°C.
5. Waiting time: Finishing plasters are applied only after the primer has completely dried (recommended after 24 hours)
6. Cleaning: Tools are washed with water immediately after work is finished.