Floor coating Deko floor Light 2K 15kg component A RAL9016 ORGAHIM

DEKO floor LIGHT Component A is a colored solvent-based epoxy resin designed for the construction of aesthetic and durable thin-layer floor coverings in interiors. This component is the basis of the system, which after mixing provides excellent adhesion to concrete surfaces and forms a dense, colored coating. The product is specially developed for rooms with light to medium traffic, ensuring easy application and high coverage on both horizontal and vertical substrates.

Component A is characterized by its ability to transform industrial and commercial areas, providing a smooth and easy-to-clean surface. The formula allows for the application of 2 to 3 layers, which guarantees saturated color and abrasion resistance. Thanks to its flexibility, the product is suitable not only for floors, but also as a protective wall coating on concrete, while maintaining stability under thermal stress up to +50°C with constant exposure.

Purpose

• Designed to work in combination with Deko floor Light 2K component B
• Interior epoxy floor coatings with light to medium traffic
• Decorative and protective coating for concrete floors and walls
• Application in warehouses, retail outlets and service areas
• Suitable for horizontal and vertical concrete foundations

Main advantages

• Excellent adhesion to various concrete surfaces
• Possibility of application on walls (vertical bases)
• High abrasion resistance for thin-film coating
• Extremely easy to apply with a short-pile roller

Technical characteristics

• Type: Solvent-based epoxy resin (Component A)
• Color: RAL 9016 Traffic White
• Density: 1.10 ± 0.05 kg/l
• Dry matter content: minimum 50%
• Consumption rate: ~ 0.13 - 0.15 kg/m² per layer
• Drying time: 24 hours at 23°C
• Packaging: 15 kg (metal bucket)

Method of use

1. Prepare the substrate mechanically by abrasive cleaning or milling.
2. Pre-mix Component A before adding the hardener
3. Apply to dry substrate with humidity below 4%.
4. Use a short-pile roller with a cross-section application of 2-3 coats
5. Protect the applied layer from moisture and condensation for at least 24 hours.