Floor coating Deko floor Light 2K 4kg component B ORGACHIM

DEKO floor LIGHT Component B is the transparent hardener that activates the chemical reaction of the epoxy system and ensures its complete hardening. This component is of key importance for achieving the mechanical strength and thermal resistance of the floor covering. As an active element of the two-component system, it ensures the homogeneous bonding of the resin, which leads to the formation of a hard and wear-resistant film.

The product is precisely dosed to ensure an optimal working time (about 6 hours at 20°C), which allows for a calm and high-quality application of the mixture on large areas. Component B ensures that the coating will reach its design load resistance, allowing pedestrian traffic only 24 hours after application. Proper mixing and compliance with technological waiting times are a guarantee for avoiding defects such as matting or whitening of the floor.

Purpose

• Curing of DEKO floor LIGHT epoxy floor coating
• Initiation of polymerization to achieve abrasion resistance
• Ensuring thermal and mechanical stability of the system

Main advantages

• Guarantees excellent strength performance of the floor film
• Provides sufficient time for processing the mixture on site
• Maintains transparency that does not change the saturation of RAL colors
• Resistant to short-term thermal exposure up to +100°C (after full curing)

Technical characteristics

• Type: Epoxy hardener (Component B)
• Color: Clear liquid
• Pot life: ~ 6 hours at 20°C
• Waiting time before recoating: minimum 16 hours (at 20°C)
• Ready for foot traffic: after 24 hours (at 20°C)
• Full cure: 7 days at 20°C
• Packaging: 4 kg (metal bucket)

Method of use

1. Pour the entire amount of Component B into the pre-mixed Component A.
2. Mix for 2-3 minutes with a low-speed electric mixer.
3. Avoid overmixing to prevent additional air from entering the mixture.
4. Observe the dew point - the base must be at least 3°C above it
5. Clean tools immediately after working with DEKO floor Thinner