Floor coating Deko floor Base 2K 10kg component A DEKO PROFESSIONAL

DEKO floor Base 2K Component A is a high-quality basic element of Orgachim's two-component epoxy system, designed for floor preparation. Thanks to its extremely low viscosity, this product has the unique ability to penetrate deep into the structure of the concrete base, filling micropores and capillaries. This creates a reliable barrier and a strong base that prevents subsequent layers from peeling and guarantees a perfect finish.
The product acts as a "bridge" between the concrete and the self-leveling epoxy coatings, significantly improving the structural strength of the surface layer. Component A is developed for professional use, providing optimal open time and easy application on large areas. Its chemical stability ensures that the floor will withstand intense loads without the formation of bubbles or cracks in the finishing coating.

Purpose:

• Used as a deep-penetrating primer for cement bases, concrete floors and screeds in indoor areas
• It is ideal for preparing surfaces in industrial halls, warehouses, car repair shops, garages and laboratories where high resistance and excellent adhesion are required before applying epoxy paints and enamels.
• Designed to work with Deko floor Base 2K 10kg component B ORGACHIM

Main advantages:

• Maximum penetration: Penetrates deeply even into dense concrete substrates
• Strengthens the base: Strengthens the top layer of concrete and prevents it from pulverizing
• Excellent adhesion: Ensures a strong bond between the substrate and the topcoat
• Professional result: Eliminates the risk of air bubbles (pinholes) in the final layer

Technical characteristics:

• Type: Two-component epoxy resin (Component A)
• Color: Clear liquid
• Density: 1.00 ± 0.05 kg/l
• Dry matter content: 58±2%
• Adhesion strength: > 1.5 N/mm²
• Consumption rate: ~ 0.2 - 0.4 kg/m² per layer
• Packaging: 10 kg

Method of use

1. Prepare the substrate mechanically by milling or abrasive cleaning
2. Mix Component A with Component B in a 1:1 weight ratio.
3. Mix with a slow-speed mixer for 2-3 minutes until completely homogeneous.
4. Apply to a dry substrate with a humidity below 4% with a brush or roller.
5. Do not dilute the product and protect from moisture for at least 24 hours after application.