Stone impregnant 800ml Estetik Stone Guard 10+ with siloxane transparent BOCHEMIT

Stone impregnation Estetik Stone Guard 10+ with transparent siloxane of the SPIRIT brand.
Stone Guard is designed to protect stone (limestone, gneiss, sandstone, etc.), concrete products, facade bricks and other materials with a porous surface and significant absorbency.
The impregnation protects the surface from the penetration of liquids, contaminants, oils, as well as from the effects of atmospheric conditions. The treated surface reduces the formation of moss, mold and fungi. Since it does not allow water to penetrate, the product protects the material from cracking when freezing in winter. Impregnation of soft materials such as sandstone, gneiss and limestone gives unique properties, strengthening the surface without affecting its appearance. The treated surface will retain its appearance and natural beauty for a longer period of time.
The impregnant absorbs deeply and thus clogs the pores of the material structure. At the same time, it forms a light protective film with a matte effect on the surface, without changing the appearance of the treated products. If you wish to increase the protective film (wet effect), it is necessary to apply additional coats after the initial impregnation until the desired effect is achieved.

Suitable for processing:

• concrete
• limestone
• brick
• sandstone
• marble
• masonry

Consumption rate: 8 - 20 sq.m/l depending on the absorption properties of the material

Instructions for use:
The surfaces intended for impregnation must be cleaned of dust and dirt in advance. We recommend applying Stone Guard with a brush, roller or two-handed spraying in dry weather as follows: The impregnant is not diluted. Stir well before use. The first layer is applied until the surface absorbs it. If there is liquid left on the surface that has not been absorbed, it should be removed with a sponge or a piece of cloth. After about 60 minutes, apply a second layer. The optimal processing temperature is from 5° to 25° C. The tools used can be cleaned with a synthetic thinner.

Stone Guard impregnant is available in 800 ml packages.