Wood varnish colorless 1l Bochemit Estetik Classic oil-based

Colorless Estetik Classic wood varnish of the BOCHEMIT brand. Estetik Classic Colorless is an oil-based impregnant - does not crack, white or flake. The product is a high-quality, innovative, oil-alkyd impregnant, designed for the treatment, protection and final finish of wooden surfaces and interior products. The varnish can be used alone - as a colorless coating on wooden surfaces, which preserves the natural appearance of the wood. It can also be applied as a final layer on wood surfaces already stained with Estetik Classic for longer-lasting protection of the products.

The innovative formula of the product allows deep penetration and good bonding with the structure of the treated wood. In this way, long-lasting protection of the treated surfaces is ensured.

Estetik Classic colorless oil impregnant is easy to maintain. It can be renovated without having to remove the old layer. It is refreshed with the application of one hand after 5-6 years, without having to sand and remove the old layer.

Application: solid wood furniture, wooden structures, paneling, other wood products indoors.

• The product absorbs deeply and binds firmly to the structure of the wood. Unlike traditional varnishes and paints, which with their larger molecules form a surface film without absorbing into the wood, which is the main reason for cracking and peeling.
• The coating does not crack, peel or whiten over time and is very easy to refresh and maintain. No mechanical or chemical preparation is required, such as sanding or treatment with paint or varnish removers.
• Refreshing is done with just one hand, after cleaning the surface from dust.
• The flaper - the patterns of the wood remain visible. The matte natural color without gloss gives a modern, soft and natural look to the processed details.

Preparation of the base:

The surfaces must be sound and cleaned of old coatings that would prevent the penetration and connection of the preparation with the structure of the wood. In order to reduce the consumption rate, it is recommended that the wood is sanded, with large hairs removed, if the treated parts are rough construction wood. If possible, it is a good idea to clean dirt and resinous stains beforehand with a suitable detergent.

Method of use:

• Sand and dust
• Shake the can 10-15 times vigorously before opening
• Stir constantly during application
• Apply one coat of product
• Allow to dry for 8-12 hours depending on the ambient temperature
• Fine re-sanding with sandpaper number above 180-200 as desired
• Apply the second coat and allow to dry for 12-24 hours
• It takes 3-4 days in dry and sunny weather to reach full strength and drying

Durability of applied protection:
Interior: over 20 years

The consumption rate depends on the method of application and the conditions of the wood:

• On non-absorbent, hard or fresh soft wood: 10-16 sq.m/l
• On old dried wood: 6-8 sq.m/l

The impregnant is available in a 1 liter package.