Silicone for laminate flooring 125ml gel sealant Click Guard against moisture

Click Guard silicone for laminate flooring of the KRONOSPAN brand. Available in a 125 ml tube. The product is a gel sealant against moisture. It is suitable for all types of laminate flooring and provides long-lasting and permanent protection against the penetration of moisture into the flooring.
Click Guard laminate sealant is used in all adhesive-free laminate flooring systems. When following the instructions for use, the gel provides good sealing and does not stick. Laminate flooring, designed for reinstallation and sealed with Click Guard, can be disassembled without damaging the slats and easily re-laid.
The method of applying Click Guard is often used in rooms where the penetration of moisture between the slats is too likely. Such are kitchens, corridors, etc. Click Guard is applied before assembly on the upper side of the feather (regardless of the connection - click, lock, etc.) along the longitudinal and transverse sides of the lamella.

Method of use:
1. Apply the sealant evenly to the click.
2. Assemble the laminate or three-layer parquet.
3. Gel that comes to the surface without tearing indicates that it is applied evenly. Allow to dry (ten minutes).
4. Remove the remaining gel with a rag or plastic spatula. Cleans easily.
5. After 20 minutes, you can safely walk on the floor, protected from moisture. Click Guard does not leave any residue as it comes colorless and is absolutely safe.

CAUTION: Do not let Click Guard dry, assemble the slats immediately. When clicking the slats, make sure that the excess amount comes out of the upper side of the slat. Thus a good compaction is achieved.

Consumption: One package of 125 ml is sufficient for compacting a floor with an area of no more than 10 sq.m.