Epoxy paint for sanitary 375ml Epomid for sinks, bathtubs and others

Epoxy system for color restoration of ceramic bathtubs, sinks, toilet bowls and other sanitary ware. The set creates a permanently hard and glossy film on ceramic surfaces. The set includes: enamel, hardener and thinner.

Features:

• Good spillage
• Does not leave traces of brushes
• Resistant to washing and detergents
• Excellent coverage
• Good hardness and durability over the final coating
• Color: white
• Shine: gloss
• Consumption: 12 sq.m/l
• Drying time: 12 hours
• Pre-reaction time of the mixture: 1 hour
• Open working hours: 8 hours
• Epoxy enamel packaging: 375 ml
• Thinner packaging: 250 ml
• Hardener packaging: 250 ml
• Mixing ratio: 2: 1

Usage:

• The surfaces must be free of defects (cracks, splashes from welding, etc.). Remove all traces of dirt, dust and other impurities. Cover the faucet and the edges of the tub or sink with duct tape. The set is enough for 5 - 6 sq.m. In case you are going to use the whole amount at once, mix the enamel and hardener in the original packaging. If necessary, dilute the mixture with the diluent approximately 5%. Mix well and leave the mixture for 1 hour /time for pre-reaction of the mixture/. The resulting solution can be used for up to 8 hours.
• When application on a smaller surface is required, the required amount of components is mixed in a separate container (other than the original packaging). The rest of the enamel, hardener and thinner are kept in their original packaging without mixing, and can be used up to a year and a half later.
• CAUTION: Do not dilute the enamel-hardener mixture after the pre-reaction time has elapsed!
• 1 to 2 coats can be applied. The second layer is applied after 12 hours from the first layer.
• The painted surface can be put into operation after 5 days from the application of the enamel.