Diaxyl Plus wood varnish protection against mold and mildew 750ml, light walnut 2503

VITEX Diaxyl Plus is a water-based wood varnish with a protective and decorative function, produced on the basis of polyurethane. The water-based polyurethane varnish is suitable for indoor and outdoor use.

Thanks to its special composition, it effectively prevents the development of mold and mildew on the protective film it forms. VITEX Diaxyl Plus impregnates the wood, forming a thin protective film, while allowing it to "breathe". The wood varnish has high elasticity, which prevents the coating from cracking. Protects against moisture and UV rays.

Characteristics:

• Polyurethane, impregnating, decorative varnish for wood
• For outdoor and indoor use
• Water-soluble
• Protects against moisture and UV rays
• Prevents the development of mold and mildew on wood
• Has high elasticity
• Impregnates the wood, forming a thin protective film, while allowing it to "breathe"
• Consumption rate: 12-16 sq.m./l.
• Surface drying: 2-3 hours
• Application tools: brush, roller, gun
• Packaging: 750 ml
• Color: light walnut 2503

Substrate preparation and application:

• In case the substrate is not new, it should be thoroughly cleaned and dried. There should be no resins, grease or residues of old varnish coatings on them.
• New wooden surfaces should be primed with a suitable wood primer before applying a layer of Diaxyl Plus.
• The product should be stirred well before use.
• Apply in one or two layers with a brush, roller or spray gun, without diluting.
• The product should not be applied at temperatures lower than 5°C, higher than 35°C and/or at relative humidity higher than 80%.
• The applied layer is dry to the touch within 2-3 hours.
• The next layer can be applied after 24 hours.
• Instruments are cleaned immediately after use with water.