Mineral cement plaster Thermoflex drawn structure 2 mm - 25 kg

Mineral cement plaster Thermoflex with drawn structure with a thickness of 2 mm. Available in a 25 kg paper bag.
Thermoflex is a dry mineral decorative plaster with very high vapor permeability, which allows the walls to "breathe". The plaster is also highly resistant to moisture.
The mineral cement plaster Termoflex is intended for obtaining protective decorative coatings with a drawn structure. It can be applied on all types of mineral bases such as concrete, cement plasters and ground coats, prefabricated concrete elements, thermal insulation boards, gypsum plaster, gypsum board, gypsum fiberboard and others. It can be applied manually or by machine.
Due to its thicker application layer compared to other plasters, Termoflex has a higher mechanical resistance, which is an advantage when applied on thermal insulation systems. It also has improved weather resistance.
The plaster has low retention of dirt and is recommended for application as a finishing layer on facades. It is suitable for application on the facades of newly built buildings, as well as in old buildings that are in the process of renovation or improvement of their thermal insulation and facade.
Properties:

• High vapor permeability and moisture resistance
• Resistant to mechanical impacts, weathering and UV rays
• Non-combustible natural product
• Suitable for manual or machine application

Composition:

• Homogeneous powder mixture of high quality white cement, granular marble, fibers, pigments, polymers and special purpose additives

Consumption rate:

• Trailed structure: about 4 - 6 kg/m2
• The cost depends strongly on the roughness of the base