Описание
Sika Top Seal 107 is a two-component ready-made solution with a low modulus of elasticity based on cement, modified with special synthetic polymers. It can be reinforced with alkali-resistant fiberglass mesh for waterproofing foundations based on bending stresses and for protecting concrete.Sika Top Seal 107 waterproofing solution is suitable for indoor and outdoor use.
The two-component waterproofing Sika Top Seal 107 is used in:
- External and internal waterproofing and protection from moisture on concrete, cement plasters and masonry
- Waterproofing and protection of hydraulic structures: pools, reservoirs, swimming pools, concrete pipelines, bridges and canals
- Protection of concrete surfaces against the effects of anti-icing salts and freezing-thawing processes
- Solid waterproofing coating on basement walls in new constructions or renovations
- Filling pores and pores
- Waterproofing of foundations and basements (not subject to hydrostatic pressure)
- Sealing of fine cracks (without movement in them) in concrete structures
- Internal waterproofing of reinforced concrete walls and floors in basements, as protection against moisture infiltration
- Waterproofing of terraces, balconies and all surfaces exposed to the weather
- Leveling composition on concrete
Key features and benefits:
- Easy to apply with a brush or trowel
- Without additional addition of water
- Pre-dosed components
- It can be applied manually or by spraying
- Easy and fast mixing
- Optimal adhesion to almost all substrates: concrete, cement mortars, stone, brick, iron and others
- Protection of concrete from carbonization
- Protection against water penetration
- Non-corrosive to steel and iron
- It can be painted
- Approved for contact with drinking water
- Consumption: 2.0 kg/sq.m./mm
Preparation of the base and method of application:
- The substrate must be sound, free of dust, dirt, loose particles, surface contaminants such as oil, grease, cement laitance and others.Cleaning can be water jet or sandblasting, mechanical or manual roughing.
- Shock/vibration-free cleaning methods are recommended
- Damaged, layered or weak concrete must be repaired using a suitable material
- The surface is wet to saturation.The wetted surface should acquire a dark matte appearance without shining, and there should be no water on the surface.
- Apply the first layer with a notched trowel (3 x 3 mm) on a flat base. Leave the first layer rough for better adhesion of the second layer.
- Once the first coat has hardened, apply a second coat of SikaTop Seal107 with a smooth trowel across the first. SikaTop Seal 107 can also be sprayed with a pump suitable for fine solution.
- When used as a protective coating on hard substrates, such as reinforced concrete, SikaTop Seal 107 can be applied without reinforcement with fiberglass mesh
- Ceramic tiles and glass mosaic tiles can be placed on SikaTop Seal 107 using a suitable cementitious tile adhesive
- The maximum recommended thickness of each layer is 2 mm
- For waterproofing and protection of concrete, the correct application thickness is at least 4 mm, applied in 2 layers
Additional information on the Sika Top Seal 107 two-component waterproofing can be found in the technical documentation of the product in the form of a PDF file.
Спецификации
- Марка
- SIKA
Продукти с подобни характеристики
Въпроси и отговори
-
Може ли да се нанася върху гипсокартон?
Юлианвижте 1 отговора-
Веселин Люцканов - администратор
Здравейте! Да, може, но задължително преди нанасянето трябва да навлажните повърхността.
Успех!
-
-
Обработваната стена трябва ли да бъде влажна преди полагането на сместа
Красимир Младеноввижте 1 отговора-
Веселин Люцканов - администратор
Здравейте! Да, обработваната стена трябва да се навлажни нежно, примерно с мокър парцал, преди полагането на двукомпонентната хидроизолация.
Успех!
-
-
За колко кадрата
Reioвижте 1 отговора-
Веселин Люцканов - администратор
Здравейте! Никъде не е указано каква площ може да покрие продуктът, тъй като това зависи от дебелината на пласта, който се нанася.
Успех!
-
-
При смесването може ли да се добавя вода?
Стоян Костоввижте 1 отговора-
Веселин Люцканов - администратор
Здравейте! При смесването на двата компонента не се добавя вода.
-
Оцени продукта