Plaster with microcement effect Balitura Microcemento MF03+Basa

BALITURA MICROCEMENTO with MF03 colorant is a high-quality decorative, multi-layer microcement coating designed for interior walls, floors and ceilings. The combination of the base and this colorant allows for the creation of a unique visual effect with an elegant industrial style and a seamless surface.

The system consists of a two-component base (10 kg of dry material + 2.8 kg of resin) and the MF03 colorant, which is mixed with the liquid component to achieve a rich and uniform tone. This specific color provides designers and craftsmen with the opportunity to personalize the interior, while maintaining the characteristics of the product: exceptional strength, high wear resistance and 100% water resistance.

Purpose

• Interior walls, floors and ceilings
• Living spaces - living rooms, kitchens, bathrooms
• Commercial and public spaces
• Premises requiring a waterproof and wear-resistant coating
• Creating a modern, industrial and minimalist interior effect

Main advantages

• Exceptional strength and high wear resistance
• 100% waterproof coating
• Elegant, seamless industrial effect
• Excellent coverage and even finish
• Solvent and VOC free
• Safe for health and the environment
• Possibility of coloring in 8 colors according to the catalog

Technical characteristics:

• Product type: decorative microcement coating
• System: two-component, water-based
• Composition: micronized cements and copolymers
• Kit: 10 kg dry material (base); 2.8 kg resin
• Application: 2 layers
• Tool: metal trowel
• Consumption: about 8 m²/set (depending on the substrate)
• Color: MF03
• Finish: sealer + 2 coats of polyurethane varnish (purchased separately)
• Recommended operating temperature: from +5°C to +25°C

Method of laying

• Preparing the base

1. The surface must be perfectly smooth, dry, clean, degreased and dust-free.
2. For absorbent surfaces such as cement screeds, putties, etc. it is necessary to prime with deep penetrating primer PRIME DB-55 Terazid.

• Mixing the components

1. The dry material is mixed with the liquid component (resin) according to the manufacturer's instructions.
2. The selected colorant is added to the mixture and stirred until completely homogenized.

• Application

1. The material is applied with a metal trowel in two layers, with an interval between them of about 12 hours.
2. Work with cross movements to achieve an even decorative effect.

• Sanding, finishing and protection

1. After each layer has completely dried, the surface is sanded to obtain a smooth and even finish.
2. The coating is sealed with one layer of special sealing coating and two layers of polyurethane varnish for maximum protection and water resistance (purchased separately)