Decorative wall coating 8kg Stella Nova Dark CAPAROL

Capatect StellaNova Dark is a specialized decorative coating with a sparkling effect, designed specifically for facades with dark surfaces. The product is an innovative solution for achieving a modern and attractive appearance of buildings by adding a discreet light-reflecting glow to the structural plasters of the Capatect series. Thanks to its rich black shade, StellaNova Dark emphasizes the depth of dark facade colors, while meeting the highest requirements for strength and durability of external surfaces.

The coating is characterized by extremely good weather resistance and is designed for easy and economical processing by machine spraying. StellaNova Dark is suitable for both new facade systems and renovation projects where an individual and prestigious architectural finish is sought. Its specific formula guarantees perfect bonding to the substrate and long-term preservation of the decorative effect, without compromising the protective functions of the facade plaster.

Purpose

• Creating a sparkling reflective effect on dark facade surfaces
• Application on fresh Capatect structural plasters with low light reflection coefficient
• Decorative design of new buildings and renovation of facades in industrial and residential areas
• Suitable for surfaces with high load intensity

Main advantages

• Unique decorative effect, specially optimized for dark bases
• Extremely high resistance to severe weather conditions and UV radiation
• Economical cost and easy operation through specialized injection
• Long-lasting protection and preservation of the saturated color of the facade
• High mechanical strength and resistance to dirt

Technical characteristics

• Type: decorative coating with reflective effect
• Color: black
• Density: 3.2 g/cm³
• Consumption rate: about 80 g/m²
• Application method: by spraying (aerial)
• Working temperature: minimum +5°C (according to substrate requirements)
• Packaging: 8 kg

Method of application

1. Preparation - StellaNova Dark must be sprayed into the freshly applied and still wet structural plaster for optimal bonding
2. Tools - it is recommended to use a spray gun (e.g. SATA JET 3000/B/RP) with a nozzle of about 1.9 mm
3. Technique - apply in even circular motions from a distance of about 40 - 60 cm from the wall to avoid the formation of accumulations ("clouds")
4. Conditions - maintain compressor pressure around 2.0 bar. Protect surfaces from wind during application to minimize material loss.
5. Protection - if there is a risk of rain or strong sun during drying, use protective nets or mats