Structure for installation in plasterboard, upper activation AM118 / 850

Structured for installation in a plasterboard wall ALCAPLAST AM118/850. The built-in structure is compatible with hanging toilet bowls with a connecting step of 180 to 230 mm. It is equipped with adjustable anchor legs, with the help of which you can level and adjust the height of the structure by up to 200 mm. The sliding rail holder for the wastewater elbow can also be adjusted - allows adjustment in eight positions between 0-93 mm.
The toilet cistern is 100% waterproof, and the high-quality insulation does not allow the formation of condensation. The cistern has a mechanism for double rinsing, independently adjustable with a hygienic reserve. Enables built-in remote flushing. Compatible with all Alcaplast buttons except touch and NIGHT LIGHT.

Specifications:

• Frame material: powder coated metal
• The frame allows for installation to a separate sufficiently strong drywall partition in front of the load-bearing wall
• The installed module is covered with gypsum board and does not need additional fixing or anchor elements
• Adjustable anchor legs and spring locking system, range 0-200 mm
• The sliding rail holder for the wastewater elbow can be adjusted to eight positions between 0-93 mm
• Installation depth adjustable from 20-95 mm
• Installation depth 170 mm
• Corner tap with the possibility of connection to the Mepla piping system
• The composition of the polystyrene insulation prevents the formation of condensation on the surface of the tank and reduces vibrations from the cistern in the building structure
• Prepared to connect a bracket with a DG 1/2'' adapter for bidet and seat
• Double flushing, independently adjustable with hygienic reserve
• Possibility for built-in remote flushing
• Compatible with all Alcaplast buttons except touch and NIGHT LIGHT
• built-in systems with upper or front activation
• Maintenance work without the use of any tools
• Rear / top water supply
• The cistern is made of one piece, thus providing 100% impermeability
• The service opening lid facilitates assembly and prevents the ingress of moisture and impurities
• Tablet dispenser included

The set of the built-in structure includes:

• Fittings 1/2" water connection with included corner tap Schell 1 / 2–3 / 8"
• Fixing set: screw Ф8 × 60 - 4 pcs., Dowel Ф12 - 4 pcs
• Set of elements for fixing toilet ceramics: hairpin M12 - 2 pcs.; washers - 4 pcs.; cover - 2 pcs.; nut - 2 pcs.; thread protector - 2 pcs.
• Knee joint HT 90/90 polyethylene, PE-HD
• Reduction HT 90/110 polyethylene, PE-HD
• Inlet seal, PP outlet, packing seal
• Drain seal, PP coupling, coupling seal
• Set of end caps to protect the connecting holes during system installation
• Set for placing toilet tablets