Decorative coating CD Stucco Satinato 2.5l CAPAROL

Decorative cover CD Stucco Satinato brand CAPAROL. It is a dispersion base for creating satin surfaces. For internal use.
The coating is available in white and can be tinted at the customer's request. With a matte degree of gloss.
It can be applied on interior surfaces of mineral plasters, gypsum plasters and gypsum bases, gypsum plasterboard and concrete surfaces. The base must be clean, free of dust and damage. The base prepared in this way is primed with a suitable primer.

Application instructions: Stucco Satinato must be homogenized well before use to avoid adhesion of the non-homogenized material to the edge and bottom of the package. This can be done manually or with an electric mixer at low speed. When applied by entanglement techniques, Stucco Satinato is applied in a thin layer using a spatula. The appearance of the surface can be changed individually by changing the working technique.
Cleaning of tools is done by washing with water immediately after use.

Consumption rate: approximately 80-100 ml/m2.

Density: 1.25g/cm3.

Temperature conditions: minimum application temperatures +5°C.

Drying time: surface dry after about 30 to 60 minutes at +20°C and relative humidity 65%. It is completely dry after 1-2 days. At lower temperatures and higher humidity, the drying time is extended.

Storage: in a dry and cool place, but without frost and protected from direct sunlight.

The coating is available in a package of 2.5 liters.