Kontaktieren Sie uns
Öffnungszeiten des Onlineshops: Montag – Freitag von 8:00 bis 18:00 Uhr
Samstag und Sonntag von 8:00 bis 17:00 Uhr
Kontakttelefon 0700 10 321 0875 303 000

Anrufe zur universellen Nummer werden gemäß Ihrem Tarifplan für 0700 berechnet

Nachricht senden Neue Nachricht

Schreiben Sie uns an [email protected] oder füllen Sie das Kontaktformular aus.

Artikel Nr. 1101070036

mapeii_100x50_fit_478b24840a
  • Schnell hydratisierender und schnell trocknender selbstnivellierender Mörtel
  • Für Innenräume
  • Für neue oder bestehende Fundamente
  • Für Krankenhäuser, Hotels, Theater, Schulen und Einkaufszentren
  • Hervorragende Widerstandsfähigkeit gegen Belastungen und Bewegungen
  • Schrumpft und reißt nicht bei einer Schichtdicke von bis zu 10 mm
  • Bei Schichtdicken über 10 mm muss Sand oder Splitt hinzugefügt werden
  • Schnellhärtend – bis zu 12 Stunden nach dem Auftragen
  • Verbrauch: 1,6 kg/m² für 1 mm Dicke
2629lv 1344 Immer niedriger Preis

Schnelle Lieferung

Sendungsverfolgung

Rückgaberecht

Beschreibung

MAPEI's Ultraplan Eco 20 is a fast-hydrating and quick-drying self-leveling solution. Ultraplan Eco 20 self-leveling screed is used for leveling and smoothing differences in thickness from 1 to 10 mm on new or existing substrates, which are prepared for laying all types of flooring. It is suitable for floors that require excellent endurance of loads and movement.

MAPEI's Ultraplan Eco 20 self-leveling screed is very suitable for surfaces on which pallet trucks move. It can usually be used in hospitals, hotels, theaters, schools and shopping malls. It is suitable only for indoor spaces.

Application:

  • Leveling of concrete slabs and cement-based screeds
  • Leveling of anhydrite bases (with a suitable primer such as Primer G or Eco Prim T)
  • Leveling of foundations in which there are floor cooling/heating systems
  • Leveling of existing concrete flooring, mosaic floor, ceramics, natural stone and magnesite bases (magnesium carbonate)

Specifications:

  • It can be applied with an automatic pressure pump at a distance of over 100 m
  • It can be applied in a layer up to 10 mm thick without shrinking, without cracks or fissures and has high compressive and tensile strength in bending, as well as resistance to injury and scratches
  • For thicknesses over 10 mm (max. 20 mm) it may be necessary to add selected sand or fraction
  • Quick tightening - the subsequent laying of flooring can begin about 12 hours after application
  • For flexible flooring, wait at least 24 hours before laying
  • Consumption rate: 1.6 kg/sq.m. for 1mm thickness

Spezifikationen

Marke
Mapei

Produkte mit ähnlichen Eigenschaften

Fragen & Antworten

0 Fragen
0 Antworten
Keine Fragen, seien Sie der Erste

Produkt bewerten

0.00 0 Kommentare
  1. 0
  2. 0
  3. 0
  4. 0
  5. 0
0% empfehlen dieses Produkt Produkt bewerten
Keine Kommentare, seien Sie der Erste

Werbung