Faser-Kit - 0,200 kg

NOVOL Fiber Kit is a reinforced fiberglass putty. The high content of long glass fibers provides high mechanical resistance and excellent filling properties in the repair of irregularities and holes in the surface. The model is a hard putty with low elasticity, which makes it suitable for repairing small areas of the surface.The product has very good adhesion to various surfaces:

• Polyester laminates
• Steel
• Aluminum
• Two-component acrylic primer
• Old paint

The curing time is between 20 - 30 minutes. at a temperature of 20°C. Heating to 60°C for a period of 10 minutes will reduce the curing time. Polyester putty is not applied at temperatures below +10°С.When mixing, the proportion of Fiber Kit is observed: 100 g. - Hardener: 2 - 3 g.Mix until a homogeneous mixture. Apply with a spatula a layer no thicker than 5 mm.