Verbinder für RGB LED Streifen SMD 5050 10mm, mit 4 Pins

LIGHTEX connector for RGB LED strip of the SMD 5050 type. With these types of components, the energy-saving SMD LED is mounted and soldered on the board. The acronym comes from Surface Mount Device, which initiates a surface-mounted device. Such devices do not emit heat and have low energy consumption.

The RGB LED connector is 10 mm wide. It is designed for connecting a piece of RGB tape, which has already been cut from the roll and there is no factory nozzle for connecting to a controller. As with other connector models, the strip for the luminaire must be cut in the right place and the direction of the positive "+" pole and the colors must be observed. With the help of the connector, fast and aesthetically pleasing connection of LED strips is performed. Individual lighting strips can also be connected to power supplies and controllers. This alternative is better than using ordinary cables and soldering them. With LED strip connectors, the connection is more beautiful and convenient. For this purpose, the individual pieces must be cut in the designated place. Then, the strips are tucked under the metal legs, after which these legs are closed. It is necessary to observe the direction of the positive and negative poles.