Kontaktieren Sie uns
Öffnungszeiten des Onlineshops: Montag – Freitag von 8:00 bis 18:00 Uhr
Samstag und Sonntag von 8:00 bis 17:00 Uhr
Kontakttelefon 0700 10 321 0875 303 000

Anrufe zur universellen Nummer werden gemäß Ihrem Tarifplan für 0700 berechnet

Nachricht senden Neue Nachricht

Schreiben Sie uns an [email protected] oder füllen Sie das Kontaktformular aus.

Artikel Nr. 0702030282

tesy_100x50_fit_478b24840a
  • Volume: 80l
  • Power: 2kW
  • Mounting: vertical
  • Energy class: S
  • Overheat protection device
  • INSUTECH insulation
  • PISTON effect
  • Dimensions: 121 x F 38.6 cm
Tage Stunden Min Sek
Angebot gültig von 01.12.2025 bis 30.12.2025
34900lvAlter Preis 31900lv 16310 Aktionspreis

Schnelle Lieferung

Sendungsverfolgung

Rückgaberecht


Preis und Lieferzeit ansehen

Wählen Sie ein Geschäft
-+

Häufig zusammen gekauft

Vertikalkessel BiLight Slim 80l 2kW, GCV 80 38 20 B11 TSRC 0401090047-new_246x246_pad_478b24840a 0401090045-new_246x246_pad_478b24840a
32738 lv 16738

Beschreibung

High-volume boiler for vertical installation TESY BiLight Slim with a capacity of 80 liters. The GCV 80 38 20 B11 TSRC consists of a housing, a flange at the bottom, a protective plastic panel and a non-return valve. In the main part of the boiler are located a steel tank in which water is stored and the so-called casing, representing the outer shell. Between them is thermal insulation of environmentally friendly high-density polyurethane foam. There are also two G-threaded tubes in the housing. They supply cold water and release hot water. An electric heater is mounted on the flange.

Magnesium protector is also installed in this type of boilers with glass-ceramic coating. The electric heater is used to heat the water in the tank and is controlled by the thermostat, which automatically maintains a certain temperature.

The device has a built-in device for protection against overheating, also called a thermal switch. It disconnects the heater from the mains when the water temperature reaches too high.The non-return valve prevents the appliance from being completely emptied when the cold water supply from the water supply is stopped. It protects the appliance from increasing the pressure in the water tank to a value higher than the allowable one in heating mode. This is done by releasing excess water through the drain hole.

The nominal power of the vertical boiler is 2000W. TESY's high-volume vertical water heater guarantees high energy efficiency thanks to its high-quality INSUTECH insulation and PISTON effect.INSUTECH is a precise technology for even distribution of high density polyurethane insulation. As a result, hot water is stored protected from cooling for a long time until its use. The incoming cold water stays at the bottom of the water tank and gently pushes the hot water up, creating the so-called PISTON effect, providing up to 15% more hot water.

The boiler offers two operating modes. It is equipped with a thermostat with thermal and electrical protection, as well as an anti-freeze device.

The vertical water heater also has a convenient external thermostat with smooth temperature adjustment, as well as a moisture-insulated switch with a light indicator for on and off.

Specifications:

  • Anti-freeze mode
  • Heating time from 15°C to 60°C: 2h 05min
  • Energy class: C
  • Annual consumption: 1410kWh
  • Dimensions: 121 x F 38.6 cm

Spezifikationen

Garantie
60 Monate
Marke
Tesy
Energieklasse
C
Produkte
Vertikale Warmwasserbereiter
Volumen
80 l
Leistung
2 kW
Heizelement
IMMERSIVES KUPFER
Maße (H/B/T) cm
120,5 x 38,6 x 41,2

Produkte mit ähnlichen Eigenschaften

Fragen & Antworten

0 Fragen
0 Antworten
Keine Fragen, seien Sie der Erste

Produkt bewerten

0.00 0 Kommentare
  1. 0
  2. 0
  3. 0
  4. 0
  5. 0
0% empfehlen dieses Produkt Produkt bewerten
Keine Kommentare, seien Sie der Erste

Werbung